Name:Dr. V. NAGA PRASAD NAIDU
Designation: Professor & Head of Mechanical Engineering
Official Address:Department of Mechanical Engineering, JNTUA College of Engineering Kalikiri Chittor (Dist), A.P. India.
Residential Address:# 9-29, Ogeti Street Tadipatri – 515 411 Anantapur Dist., A.P. India.
Email(s): nagveluri@gmail.com , Nagveluri.mech@jntua.ac
contact number: 9989988920
Institution:JNTUA College of Engineering Kalikiri Chittor (Dist), A.P. India. PIN Code 517234.
Date of Birth: 01.07.1973.
Gender: Male
Category: General.
Whether differently abled: NO.
Qualifications: B.E. (Mechanical Engineering) From University of Madras,
Chennai, T.N. Indian in the year 1997.
M.Tech (Heat Power-Refrigeration& Air-conditioning)
J.N.T. University,
Hyderabad, A.P. India in the year 2002.
1. Ph.D., (Hybrid Composites)
Department of Polymer Science & Technology,
S.K. University,
Anantapur, A.P. India in the year 2007.
2. Ph.D in Mechanical Engineering Department of Mechanical Engineering, JNTUA, A.P. India in the year 2015.
Ph.D Thesis details: 1. Mechanical and Thermal properties of Sisal/Glass
fibre reinforced polyester resign based hybrid composites.
Under the guidance of Prof. S. Venkata Naidu, Professor of Polymer Science & Technology, Department of Polymer Science & Technology,
S.K. University,
Anantapur, A.P. India in the year 2007.
2. Performance evaluation of a four stroke Diesel engine by using various biodiesel blends with an air gap and insulated piston inserts.
Under the guidance of Prof. V. Pandurangadu, Department of Mechanical Engineering, JNTU Anantapur, A.P. India in the year 2015.
Work Experience: 22 Years of Teaching Experience 3 Industry Experience.
| S.No. | Position held | Name of the Institution | From | To | Pay Scale |
|---|---|---|---|---|---|
| 1 | Assistant Professor in Mechanical Engineering | Intell Engineering college, KLD Road Anantapur-515004, A.P India. | 5th June 2001 | 4th Aug 2002 | 8000-275- 13500 |
| 2 | Associate Professor in Mechanical Engineering | Intell Engineering college, KLD Road Anantapur- 515004, A.P India. | 5th Aug 2002 | 31st Aug 2007 | 12000-425- 18500 |
| 3 | Professor in Mechanical Engineering | Intell Engineering college, KLD Road Anantapur- 515004, A.P India. | 1st Sep 2007 | 31st Dec2007 | 16400-450- 20900-500- 22400 |
| 4 | Professor in Mechanical Engineering and Principal | Intellectul Institute of Technology(Formely Moula Ali College of Engg&Tech),Gotkur(V), Kuderu(Mandal),Bellary Road, Anantapur – 515 711, A.P. India. | 1st Jan 2008 | 12th Nov2014 | 37400- 67000-AGP 10000 |
| 5 | Professor in Mechanical Engineering and Principal | Intell Engineering college, KLD Road Anantapur- 515004, A.P India. | 13th Nov 2014 | 5th July2017 | 37400- 67000-AGP 10000 |
| 6 | Professor in Mechanical Engineering and Principal | GATES Institute of Technology, Gooty, Ananthpuramu(DT) | 6th Juiy2017 | 31st Dec 2018 | 144200- AGP 10000 |
| 7 | Professor of Mechanical Engineering | JNTUA College of Engineering, Kalikiri, Chittor (Dist) AP | 1st Jan 2019 | Till date | 144200- AGP10000/- |
ADMINISTRATIVE EXPERIENCE.
Presently working as: Professor & Head of Mechanical Engineering, JNTUACEK Officer in-charge Examinations, JNTUACEK
Earlier worked as: Principal of affiliated Institution for a period of Ten years, Officer in-charge of NSS unit, In charge of I.C Engines Laboratory, In charge Machine Shop Laboratory, Officer in-charge Mechanical Work Shop Officer in-charge of Student Welfare Division Officer in-charge of Department of Sports Officer in-charge of Examination Section Head of the Mechanical Engineering Department.
MEMBERSHIP OF REPUTED PROFESSIONAL BODIES:
- Life member of Indian Society for Technical Education (I.S.T.E) – LM – 80189.
- Life member of Institution of Engineers Indian.
- Member of International association of Engineers (IAENG).
- Member of Institute of Research engineers and Doctors (IRED).
PAPERS PUBLISHED / PRESENTED:
- International/National Journals : 31
- International/National Conferences: 32
Journals:
| Sl. No. | Name of the Journal | Title of Paper | Month & Year of Publication, | National or International |
|---|---|---|---|---|
| 1 | Journal of composite materials Vol:44, Issue:26, pp3195-3202 ISSN: 0021-9983 | Frictionless coefficient, Hardness, Impact strength and Chemical resistance of Sisal/glass fibre reinforced hybrid composites | 2010 | National |
| 2 | International Journal of Fiber and Textile Research (IJFTR) 2011; 1(1): 11-14.SSN:0971- 0426 | Compressive & impact properties of sisal/glass fiber reinforced hybrid composites | 2011 | International |
| 3 | Journal of Materials Science, An Indian Journal Ma65791025/2011. ISSN:0022-2461 | Heat capacity of sisal/glass fibre reinforced hybrid composites, | 2011 | National |
| 4 | International Journal of Mechanical Engineering and Technology (IJMET), February-2014, Vol: 5, Issue: 2, PP 171-179, ISSN: 0976- 6340 | Performance evaluation of a low heat rejection diesel engine with cotton seed biodiesel, | 2014 | International |
| 5 | Journal of Engineering and Innovative Technology (IJEIT), April 2014 , vol:3, Issue 10, PP 255-258, 6ISSN: 2277-3754 | Experimental investigation on a four stroke diesel engine operated by cotton seed biodiesel blends with diesel, | 2014 | International |
| 6 | International Journal of Engineering and Technology research (IJETR), Feb-2014, Vol: 2, Issue: 2, PP 172-176, ISSN:2321-0869 | Comparison and evaluation of performance and emission characteristics of four stroke diesel engine with Neem and cotton seed biodiesel | 2014 | International |
| 7 | International Journal of Emerging Technology and Advanced Engineering , (IJETAE), Feb-2014, Vol-4, Issue: 2, PP 477-481, ISSN: 2250-2459 | A comparative study of performance and emission characteristics of four stroke diesel engine with Jatropha and Cotton seed biodiesel | 2014 | International |
| 8 | International Journal of Manufacturing and Mechanical Engineering (IJMME), (2014), Vol: 1, No: 1 PP 3-9, | Experimental Investigation on a four stroke diesel engine operated by Jatropha biodiesel and its blends with diesel | 2014 | International |
| 9 | Journal of Innovative Engineering (JIE), 2014, 2(2), 4-9, ISSN: 2347-7504 | Evaluation of performance and emission characteristics of four stroke diesel engine with neem biodiesel | 2014 | National |
| 10 | International Journal of application or innovation in engineering and management (IJAIEM), July-2014, Vol: 3, Issue: 7, PP 221-225, ISSN:2319-4847. | Experimental Investigation on a four stroke diesel engine operated by Karanja biodiesel and its blends with diesel | 2014 | National |
| 11 | International journal of innovative technology and research (IJITR), August – September 2014 Volume No.2, Issue No.5, pp 12223- 12227, ISSN: 2320-5547 | A Comparative Study of Performance and Emission Characteristics of Four Stroke Diesel Engine with Mahua and Cotton Seed Biodiesel Blended with Diesel | 2014 | National |
| 12 | IPASJ International Journal of Mechanical Engineering (IIJME), September-2014, Vol: 2, Issue: 9, pp 58-63, ISSN: 2321-6411 | Performance and Emission characteristics of a DI Compression ignition engine operated by Mahua biodiesel blended with diesel | 2014 | nternational |
| 13 | International journal of engineering sciences & research technology (IJESRT), October-2014, Vol: 3, Issue:10, pp 79-83, ISSN:2277-9655 | Performance and Emission Characteristics of a Four Stoke Diesel Engine Operated by Neem Biodiesel Blended with Diesel | 2014 | International |
| 14 | International Journal of Innovative Research in Science, Engineering and Technology(IJIRSET), October-2014, Vol: 3, Issue: 10, pp 16510-16516, ISSN:2319-8753 | A Comparative Study of Performance and Emission Characteristics of a Four Stroke Diesel Engine with Karanja and Cotton Seed Biodiesel Blended With Diesel | 2014 | International |
| 15 | International journal of advanced Engineering, Management and Science (IJAEMS), June-2016 vol:2 Issue:6, pp751-759 ISSN:2454-1311 | An Experimental Investigation and comparative analysis on a four stroke CI engine with two biodiesel blends Hazelnut and Palm | 2016 | International |
| 16 | International journal of advanced Engineering, Research and Science (IJAERS), June-2016 vol:3 Issue:6, pp112-119 ISSN:2349-6495 | An Experimental Investigations on a four stroke CI engine with Diesel and biodiesel blends as fuel (Hazelnut) | 2016 | International |
| 17 | SS International Journal of Multidisciplinary Research (IJMR), June-2016 vol:2 Issue:6, pp30-36 ISSN:2455- 3662 | Experimental Investigations on a four stroke CI engine to study the performance parameters and emission characteristics by using Diesel and biodiesel blends as fuel (Hazelnut) | 2016 | International |
| 18 | Internationl journal of dvanced technology and Innovative research (IJATIR) Dec-2016, Vol:08, Issue:22, pp 4298-4305, ISSN: 2348- 2370 | Design and analysis of Four wheeler airless tire. | 2016 | International |
| 19 | Internationl journal of dvanced technology and Innovative research (IJATIR) Dec-2016, Vol:08, Issue:22, pp 4306-4311, ISSN: 2348- 2370 | Design optimization of car front bumper | 2016 | International |
| 20 | International Journal of Mechanical and production engineering research and development(IJMPERD) Aug-2017, Vol:07, Issue:04, pp19-28 ISSN 2249-6890 | Tip leakage effects on flow field of a centrifugal compressor | 2017 | International |
| 21 | International journal Engineering and management Research (IJEMR) June- 2017, Vol:07, Issue:03 pp 24- 251,ISSN:2250-0758- | Computational analysis of a Centrifugal compressor with partial shroud on tip of blade | 2017 | International |
| 22 | International journal for research in applied science and engineering Technology(IJRSET) July- 2017, Vol:05, Issue:VII pp 398-404,ISSN:2321-9653 | Computational analysis of a Centrifugal compressor with partial shroud | 2017 | International |
| 23 | IOSR Journal of Mechanical and Civil Engineering (IOSR- JMCE) | A comparative study on Mechanical properties of Natural and synthetic fibre reinforced Polymer composites | 2017 | International |
| 24 | IOSR Journal of Mechanical and Civil Engineering (IOSR- JMCE) | Evaluation of performance and emission characteristics of four stroke Diesel engine with Mahua biodiesel blends | 2017 | International |
| 25 | International journal of core engineering and Management -2017, pp 65-70,ISSN:2348- 9510 | A differential ger box analysis through finite element methods. | 2017 | International |
| 26 | International journal of Innovative Technologies (IJITECH) vol 05, Issue 10, October 2017 pp 1926-1930 ISSN:2321-8665 | Material optimization of control Arm | 2017 | International |
| 27 | International journal of Core Engineering and Management, ISSN No : 2348-9510 | A Differential gear box analysis through finite element methods | 2017 | International |
| 28 | International journal of Core Engineering and Management, ISSN No : 2348-9510 | Design and analysis of V- Tail unmanned air vechile(UAV) | 2017 | International |
| 29 | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) Trans sellers Journal publications | Performance evaluation of a four stroke Diesel engine with cotton seed, jatropha and karanja biodiesel blends | 2020 | International |
| 30 | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) Trans sellers Journal publications | Bamboo and pineapple leaf fiber reinforced neem shell liquid composite | 2020 | International |
| 31 | International Journal of Application or Innovation in Engineering & Management (IJAIEM) | Fabrication and Investigation of Mechanical properties of Natural and Synthetic fibre reinforced Polymer Hybrid Composites | 2020 | International |
Conferences:
| Sl. No. | Name of the Conference | Place | Title | Month & Year | National or International |
|---|---|---|---|---|---|
| 1 | National Conference on Advanced trends in Mechanical Engineering Research &Development, ( MINAC– 2001) | JNTU College of Engineering, Anantapur A.P. India | Investigations of the suitability of Rape seed oil in C.I. Engines | 18th October 2001 | National |
| 2 | National Conference on advanced trends in mechanical engineering research and development (MINAC – 2002) | JNTU College of Engineering, Anantapur A.P. India | Rapid prototyping | 21st December 2002 | National |
| 3 | National Conference’ in mechanical engineering research and development (MINAC – 2002) | JNTU College of engineering, Anantapur, A.P. India | Manufacturing in a competitive environment | 21st Dec 2002 | National |
| 4 | National Conference on Advanced trends in Mechanical Engineering (NATCON ME – 2004) | M.S. Ramaiah College of Engineering, Bangalore – K.N. | Performance evaluation on Single Cylinder diesel engine with two different pistons and two metallic coatings | 12-13 March 2004 | National |
| 5 | National Conference on Integration of energy from conventional and Non- Conventional Sources | Lakshmi Narain College of Technology, Bhopal M.P.India. | Techniques to improve the performance of wind energy conversion systems (WECS) | 7-9 October 2006 | National |
| 6 | National Conference on Emerging trends in mechanical engineering | Adhiyamman College of Engineering – Hosur – T.N. | Mechanical Properties of Sisal/Glass fibre hybrid composites | 2007, 1-2 March 2007 | National |
| 7 | National conference on a Trends in Mechanical Engineering (TIME – 2007) | A.G.Awate College of Engineering , Pune, M.H | Small Scale industries in developing countries a review of concepts & techniques | 5-6 Sep 2007 | National |
| 8 | National Conference on Receipt trends in Mechanical Engineering Sciences (RTIMES – 2007). | Sri Siddartha Institute of technology, Tumkur, K.N | Stress management in publication company | 15-16 Nov 2007 | National |
| 9 | National conference Advances in mechanical Engineering (NCAME – 2008) | PVP Siddaratha Institute of technology Vijayawada, A.P. | Investigative study of Thermal conductivity of Natural / Synthetic fibres reinforced hybrid composites | 11-12 Jan 2008 | National |
| 10 | 15th International conference on recent advances in Mechanical engineering organized by Indian society for mechanical engineers(ISME) | Rajeev Gandhi Technical University Bhoopal | Synthetic Composite material- Anew material for Leaf springs | – | International |
| 11 | International conference on recent advances in Materials, processing and characterization (RAMC- 208) | PVP Siddaratha Institute of technology Vijayawada, A.P. | Heat Capacity of Sisal/Glass fibre reinforced Hybrid Coposites | 03-04 July 2008 | International |
| 12 | International conference on recent advances in Materials, processing and characterization (RAMC- 2008) | PVP Siddaratha Institute of technology Vijayawada, A.P. | The Material selection for Wind Turbine Blades Through ANSYS and analysis of performance of Blade | 03-04 July 2008 | International |
| 13 | Control Instrumentation and system Conference(CISCON-2009) | Manipal University, Karnataka. | Optimization of Antenna backup plate- A design through Ansis. | 2009 | National |
| 14 | 2nd International conference on current trends in Engineering and Management (ICCTEM- 2014). | Vidyavardhaka College of Engineering, Mysore, Karnataka | Experimental Investigation on a four stroke diesel engine operated by neem biodiesel blended with diesel | 17-19 July 2014 | International |
| 15 | National conference on advancement and innovations in Engineering and Technology and Management (AIETM- 2014) | Joginpally B R Engineering College, Hyderabad, AP. | Evaluation of performance and Emission Characteristics of four stroke diesel engine with neem biodiesel | 19-20th March 2014. | National |
| 16 | International Conference on advanced in Engineering research and Applications (ICAERA-2014) . | Oriental College of Technology, Bhopal | Evaluation of performance and emission characteristics of four stroke diesel engine with jatropha and cotton seed biodiesel | 25-26 March 2014 | International |
| 17 | ASME-014 November 14-20 2014 Montreal, Canada | International Mechanical Engineering congress & Exposition | Comparison and evaluation of performance and emission characteristics of four stroke diesel engine with Karanja and cotton seeds biodiesel | November 14-20 2014 | International |
| 18 | International conference on recent trends in Mechanical Engineering(NECICRTME- 2015) | Narasarao pet engineering college, Narasarao pet, Guntur(DT). | A comparative study of Performance and emission characteristics of a four stroke diesel engine with Mahua and Jatropha bio diesel blends. | 20th – 21st November- 2015 | International |
| 19 | UGC National seminar on creativity and Innovations in Management. | Sri Krishna devraya Institute of management. | Exploring HR management Practices for the development of small scale Indutries. | 29th– 30th November 2015 | National |
| 20 | 3rd National conference on Innovations in Mechanical Engineering NCIME-15, Under TEQUIP-II | Department of Mechanical Engineering, Madanapalle Institute of technology and Science, Madanapalle, Chittor (DT) AP | Modeling and finite element analysis of suspension system for two wheeler | 23rd and 24th December 2015 | National |
| 21 | 4th National conference on Innovations in Mechanical Engineering NCIME-16, Under TEQUIP-II | Department of Mechanical Engineering, Madanapalle Institute of technology and Science, Madanapalle, Chittor (DT) AP | Strength Prediction of Segment joint in Rocket Casing FEA for Stress analysis | 21st and 22nd October- 2016 | National |
| 22 | International Conference on Knowledge, Information, Technology and Sciences ICKITS-2016 and In association with IRAJ Research Forum | KKR and KSR Institute of Technology and Sciences, Guntur, AP | Multiple response Process parameters Optimization of Turning AL-TICp Metal matrix Composites | 11th and 12th November 2016 | International |
| 23 | International Conference on Knowledge, Information, Technology and Sciences ICKITS-2016 and In association with IRAJ Research Forum | KKR and KSR Institute of Technology and Sciences, Guntur, AP | Performance evaluation of a heavy duty Chisel plow at various Tillage depth and forward speed | 11th and 12th November 2016 | International |
| 24 | International Conference on Knowledge, Information, Technology and Sciences ICKITS-2016 and In association with IRAJ Research Forum | KKR and KSR Institute of Technology and Sciences, Guntur, AP | Computational programming method for rotor blade bucking strength determination | 11th and 12th November 2016 | International |
| 25 | National Conference on ICT Empowered Teaching, Learning and evaluation NCICT-2016 | SSBN Degree College (Autonomus), Aanthapuramu, AP. | Contemporary Issues and Challenges of Higher education in India. | 16th and 17th December 2016 | National |
| 26 | National Conference on ICT Empowered Teaching, Learning and evaluation NCICT-2016 | SSBN Degree College (Autonomus), Aanthapuramu, AP. | Teaching English Language through ICT to the Engineering students – A case Study | 16th and 17th December 2016 | National |
| 27 | National conference on emerging trends in Mechanical Engineering NCETME-2K17 | Department of Mechanical Engineering, St. Jhon Engineering college, Emmiganur, Kurnool DT | A Differential gear box analysis through finite element methods | March 2017 | National |
| 28 | National conference on emerging trends in Mechanical Engineering NCETME-2K17 | Department of Mechanical Engineering, St. Jhon Engineering college, Emmiganur, Kurnool DT | Design and analysis of V- Tail unmanned air vechile(UAV) | March 2017 | National |
| 29 | National Conference on innovative approaches in mechanical engineering NCIAME-2K17 | Department of Mechanical Engineering, St. Martin Engineering college, Secunderabad- 500014 | A comparative study on Mechanical properties of Natural and synthetic fibre reinforced Polymer composites | 22nd and 13rd September 2017 | National |
| 30 | National Conference on innovative approaches in mechanical engineering NCIAME-2K17 | Department of Mechanical Engineering, St. Martin Engineering college, Secunderabad- 500014 | Evaluation of performance and emission characteristics of four stroke Diesel engine with Mahua biodiesel blends | 22nd and 13rd September 2017 | National |
| 31 | International conference on Materials Science (ICMS) | Department of Physic, JNTUA College of Engineering Anathapuramu | Infuence of Nano filler on Mechanical behavior of Sis fibre reinforced polymer composites | April 11- 13, 2022 | International |
| 32 | Fabrication and investigation of Mechanical properties of natural fibre reinforced composites with Alumina Nano filler material | Department of Physic, JNTUA College of Engineering Anathapuramu | Infuence of nano filler on Mechanical behavior of Sis fibre reinforced polymer compsites | April 11- 13, 2022 | International |
FDP/Workshops organized:
| S.No. | Name of the FDP/ Workshop | Place | Title | Month & Year | National or International |
|---|---|---|---|---|---|
| 1 | M Blitz2K19 A national level student technical Symposium | Department of Mechanical Engineering, JNTUA college of Engineering Kalikiri. | M Blitz2K19 | 13-14 Feb2019 | National |
| 2 | A National Level workshop on 3D printing | Department of Mechanical Engineering, JNTUA college of Engineering Kalikiri. | A National Level workshop on 3D printing | 05 June 2019 | National |
| 3 | AICTE Training and Learning (ATAL) Faculty development program on Solar Power for rural development | Department of Mechanical Engineering, JNTUA college of Engineering Kalikiri. | Faculty development program on Solar Power for rural development | 5th to 9th October 2020 | National |
| 4 | A National Level workshop on Intellectual Property rights (IPR) | Department of Mechanical Engineering, JNTUA college of Engineering Kalikiri. | workshop on Intellectual Property rights (IPR) | 08 Feb 2022 | |
| 5 | M Blitz2K22 A national level student technical Symposium | Department of Mechanical Engineering, JNTUA college of Engineering Kalikiri. | M Blitz2K19 | 08-09 June- 2022 | National |
FDP/Workshops attended:
| Sl. No. | Name of the FDP/ Workshop | Place | Title | Month & Year | National or International |
|---|---|---|---|---|---|
| 1 | National workshop on new concepts in energy utilization | Department of Mechanical Engineering, JNTU College of Engineering, nantapur515002 A.P, India. | National workshop on new concepts in energy utilization | 30th Sep 2003 | National |
| 2 | A National level work shop Composite Materials | Department of Mechanical Engineering, St. Jhons College of Engineering & Technology, Yemmiganur, Kurnool (DT), | A National level work shop Composite Materials | 9th February 2008 | National |
| 3 | National work shop on “Professional approach to corporate World” at | Intell Engineering college, KLD Road Anantapur- 515004, A.P India | National work shop on “Professional approach to corporate World” at | 02nd & 03rd Aug2008 | National |
| 4 | National work shop on “MAT LAB | Intell Engineering college, KLD Road Anantapur- 515004, A.P India. | National work shop on “MAT LAB” | 14th Aug2008 | National |
| 5 | National seminar on Physical Techniques in structure Determination of Biomolecules | Department of Physics, S.K University, Ananthapurumu. | National seminar on Physical Techniques in structure Determination of Biomolecules | 21st and 22nd October 2008 | National |
| 6 | International Conference on “Advancements in Polymeric Materials” APM- 2001 Innovations in materials and product development | Central Institute of Plastics Engineering and Technology (CIPET) Chennai, TN. | International Conference on “Advancements in Polymeric Materials” APM-2001 Innovations in materials and product development | 25th to 27th March 2011 | National |
| 7 | Faculty development programme on Loophole – Ethical Hacking workshop | Kyrion Digital Securities (P) Ltd, organized at Intellectual Institute of Technology, Ananthapuramu. | Faculty development programme on Loophole – Ethical Hacking workshop | 8th August 2012 | National |
| 8 | One day work shop for Training Resource Persons on Outcome based Accreditation | JNT University anathapuramu, Ananthapuramu. | Training Resource Persons on Outcome based Accreditation | 29th April 2013 | National |
| 9 | One day seminar on Quality of Education in Private Engineering Colleges | Akil Bharathiya Vidyarthi Parishad (ABVP), Ananthapuramu, organized at JNTU College of Engineering campus, Ananthapurmu. | One day seminar on Quality of Education in Private Engineering Colleges | 8th July 2014 | National |
| 10 | One day Work shop on Awareness on various programs for Foreign University Collaborations | Foreign Affairs, JNT University anathapuramu, Ananthapuramu. | Awareness on various programs for Foreign University Collaborations | 16th May 2015 | National |
| 11 | One day work shop on Awareness on Creating Centre of Excellence | Foreign Affairs, JNT University anathapuramu, Ananthapuramu. | One day work shop on Awareness on Creating Centre of Excellence | 26th June 2015 | National |
| 12 | One Day Programme on Crafting Powerful Questions | Department of Mechanical Engineering, JNTU College of Engineering, Anantapur515002 | One Day Programme on Crafting Powerful Questions | 16th July 2016 | National |
| 13 | DST-SERB sponsored Two National level Seminar on Recent advances in additive Manufacturing | Department of Mechanical Engineering, Madanapalle Institute of technology and Science, Madanapalle, Chittor (DT) AP | DST-SERB sponsored Two National level Seminar on Recent advances in additive Manufacturing | 19th and 20th August 2016 | National |
| 14 | IBS Faculty Knowledge Program | IBS Business School, Hyderabad, organized at Ananthapuramu | IBS Faculty Knowledge Program | 26th August 2016 | National |
| 15 | National Conference on Emerging Trends in Mechanical Engineering (NC e-TIME16) | Department of Mechanical Engineering, JNTU College of Engineering, Anantapur515002 A.P, India. | National Conference on Emerging Trends in Mechanical Engineering (NC e-TIME16) | 27th August 2016 | National |
| 16 | Two day National level Work shop on Finite Element Analysis | Department of Mechanical Engineering, Intell,Engineering college, KLD Road Anantapur- AP., INDIA. | Two day National level Work shop on Finite Element Analysis | 6th and 7th October 2016 | National |
| 17 | DST sponsored National seminar on “Additive Manufacturing and 3D printing | PVP Siddhartha Institute of Technology, Vijayawada, AP | DST sponsored National seminar on “Additive Manufacturing and 3D printing | 18th and 19th November 2016 | National |
| 18 | One day State level workshop on NEERU- PRAGATHI | Andhra Pradesh state Council of Higher Education (APSCHE) Amaravathi, organized at Acharya Nagarjuna University, Guntur, AP | One day State level workshop on NEERU- PRAGATHI | 8th May 2017 | National |
| 19 | Two day workshop on Finite element analysis of structures (FEAST) Software | Jointly organized by Indian Society for Science and Engineering (ISSE) AMARAVATHI Chapter, PVP Siddhartha Institute of Technology, Vijayawada, AP and Indian Space Organization. | Two day workshop on Finite element analysis of structures (FEAST) Software | 3rd and 4th August 2017 | National |
| 20 | Work shop on 21st century teaching Strategies | JNTUA, Anantapur | Work shop on 21st century teaching Strategies | 16th September 2017 | National |
| 21 | A National level workshop on Effective strategies in research project proposal writing and linking funding agencies | Loyola College (LIFE CAS) Research foundation Chennai. | A National level workshop on Effective strategies in research project proposal writing and linking funding agencies | 23rd nd 24th October 2017 | National |
| 22 | CATIA V5 Chassis Design | AP State Skill Development Corporation (APSSDC) | Online workshop on CATIA V5 Chassis Design | 20-24 July 2020 Five days | National |
| 23 | AICTE STTP on Nanotechnology and Functional Materials (NTFM) | SV College of Engineering, Karakambodi Road, Tirupathi. | STTP on Nanotechnology and Functional Materials (NTFM) | 27 July 2020 to 01August2020 Six days | National |
| 24 | Future of Data transmission Li- Fi | Sri Eswar College of Engineering, Coimbatore | One day online workshop on Future of Data transmission Li- Fi | 25th July 2020 | National |
| 25 | Engineering optimization Method and application | Sri Eswar College of Engineering, Coimbatore | One day online workshop on Engineering optimization Method and application | 27th July 2020 | National |
| 26 | One day online workshop on Impact of COVID-19 on the development of rural economy challenges and opportunities | Lead India Foundation& JNTUA, | Impact of COVID-19 on the development of rural economy challenges and opportunities | 27th July 2020 | National |
| 27 | Online webinar on Learning management system | mUni Campus Digital services | One day Online webinar on Learning management system | 27th July 2020 | National |
Orientation / Refresher Courses attended:
| Name of the Course | Organized by | From | To | Duration | Year |
|---|---|---|---|---|---|
| Orientation & Refresher Course | Osmania University, Hyderabad – A.P. | 13th July 2001 | 22nd July 2001 | 2 Weeks | 2001 |
| AICTE – ISTE Summer School on Recent trends in Automobiles | Annamalai University Chidhambaram T.N. | 2nd June 2003 | 13th June 2003 | 2 Weeks | 2003 |
| AICTE – ISTE Training Program on cooling of Electronic Equipments | Sree Nidhi Institute of Science & Technology, Hyderbad. | 14th June 2004 | 25th June 2004 | 2 Weeks | 2004 |
| Mission10X Academic leadership programme | Wipro Technologies, Manikonda, Hyderabad. | 22nd Jan- 2012 | 25th Jan- 2012 | One Week | 2012 |